Main : Unanswered Threads - Messaging

Sync archive SMS message from PC to Phone

developerworldwatch@kpi-consulting.net — Thu, 01 Oct 2009 03:45:02 GMT

Hi guys need help how to sync back my archive sms message back to my phone memory or memory stick using the phone pc suite.My unit is SE C901 I used the phone pc suite to archive the sms message and now I want to sync it back to my phone but it wont. Thank you very much in advance.

Disable new event notification

developerworldwatch@kpi-consulting.net — Mon, 28 Sep 2009 13:19:29 GMT

Is there a way to disable the new event notification when new SMS is received using AT commands?

OMA / OTA - general wap setting w960i (almost working)

developerworldwatch@kpi-consulting.net — Tue, 22 Sep 2009 15:38:40 GMT

I have found out that the below oma document is accepted by both nokia and sony ericsson phones, and is saved as a setting in the phone with no errors.

However I am not able to surf with the sony Ericcson phone(w960i), because I first manually need to put the newly created apn into a group called internet. When that is done I am able to surf as normal.
In the menu "Internet account" my apn is displayed, and to the right there is a tab called "Groups". Under the group a value called "Internet" is displayed. When pushing it I can "add new account" and then select the apn and add it to the group. When this is done I am able to surf on the internet !

Can anybody tell me how to send this setting also to the phone ? I have tryed to look at Ericsson Developer site, but can't find any usable info about this !

<?xml version="1.0"?>
<!DOCTYPE wap-provisioningdoc PUBLIC "-//WAPFORUM//DTD PROV 1.0//EN" "http://www.wapforum.org/DTD/prov.dtd"> version="1.0">

<wap-provisioningdoc

Thanks a lot

sjak

java SMS manager

developerworldwatch@kpi-consulting.net — Sat, 05 Sep 2009 10:14:39 GMT

Is there any java application available for easy viewing of SMS and to mark while viewing? Also the user should be able to delete or move the marked SMS. Now I'm using PC suite for handling SMS

password protect sms

developerworldwatch@kpi-consulting.net — Sun, 28 Jun 2009 04:58:49 GMT

hey is der any way i can password protect messaging in my c510 .....its my 6 th ericsson phone till now ....still havent figured out anythin .... plz suggest something ...some development ....

plz reply ......

regards

vinzzz

software & mobile development Main: Post New Thread

Email Server Certificate Invalid

developerworldwatch@kpi-consulting.net — Thu, 25 Jun 2009 23:30:46 GMT

I am having an issue with my W760i's email client recognizing my IMAP4 email server's SSL certificate. It informs me that the certificate is invalid. I have tried to download and transfer the certificate but the phone informs me that it already exists, but it does not display the cerfificate nor does it recognize my SSL certificate.

Any thoughts?

Thanks,

Dan

1 phone uses 2 port names

developerworldwatch@kpi-consulting.net — Tue, 23 Jun 2009 08:14:27 GMT

Hi,

I'm using my Sony Ericsson W200i connected to my USB port using the cable provided with the phone. I use Ubuntu 9.04 OS and minicom (similar to hyperterminal) to communicate with the phone using AT commands. I noticed that my phone, when connected, uses 2 port addresses at once, /dev/ttyACM0 and /dev/ttyACM1. Both ports are responding to AT commands from the terminal but they both point to the same phone, just one W200i. This causes some problems as I'm using many phones connected to my PC via USB ports. This makes my programs assume there are 2 phones available, while actually, I've connected only 1. Is this normal behaviour or is something wrong with my phone?? Any help would be great! All I want is my W200i to use just 1 port address, /dev/ttyACM0 and not 2, as it is doing now. Thanks!

Kaushik.

SMS Access (other than via AT Commands)?

developerworldwatch@kpi-consulting.net — Thu, 28 May 2009 09:50:36 GMT

Hello all,

I've been doing a lot of reading on the internet about communicating with a mobile phone through your PC (GSM modems, AT commands etc.) and have learnt many interesting things. The one thing I can't seem to find any information about is where/how the SMS messages are stored on a K800i phone? I'm guessing this is proprietry information and it may not be pertinent to my biggest curiousity, and that is, how does the phone store and retrieve the time/date of sent messages? Also, the SMS software (firmware?) that is built into the phone keeps track of whether an SMS has been replied to or forwarded, but is there any way to access this?

Where is all this information stored and is there some way of accessing this information. All the documentation I've found talks about AT commands, but I'm sure there must be some "low-level" way of communicating with the phone as well (manufacturer-specific)? If not, are there any SE-specific AT commands that might address this?

Any comments or advice would be gratefully received.

Pete

Problem in Sending Two Page SMS

developerworldwatch@kpi-consulting.net — Thu, 21 May 2009 13:24:29 GMT

Hi,

I am using GC79 GSM Modem and i have created an application on VB6 and Visual Studio to send SMS, it is working fine but when i want to send text more than 160 character, it only sent 1 page (i.e 160 characters). I am using the following code:

In Visual Studio C#

=========================================

SPort.Write("AT \n\r");

Thread.Sleep(500);

SPort.Write("AT+CMGF=2 \n\r");

Thread.Sleep(500);

SPort.Write("AT+CSDH=1 \n\r");

Thread.Sleep(500);

SPort.Write("AT+CMGS=" + sCellNo + " \n\r");

Thread.Sleep(500);

SPort.Write(sTextMessage + ((char)26));

Thread.Sleep(6000);

============================================

sCellNo = number to sent

sTextMessge = Text to sent

-----------------------------------------------------------------------------------------

In Visual Basic 6

=============================================

Dim SBUFF As String

Dim ReturnStr As String

SBUFF = Space(256)

MSComm1.Output = "AT" & vbCrLf

Sleep 500

ReturnStr = MSComm1.Input

MSComm1.Output = "AT+CMGF=1" & vbCrLf 'This line can be removed if your modem will always be in Text Mode...

'MSComm1.Output = "AT" & vbCrLf

Sleep 500

ReturnStr = ReturnStr & vbNewLine & MSComm1.Input

MSComm1.Output = "AT+CSDH=1" & vbCr

Sleep 500

ReturnStr = ReturnStr & vbNewLine & MSComm1.Input

MSComm1.Output = "AT+CMGS=" & strMobno & "" & vbCrLf 'Replace this with your mobile Phone's No.

Sleep 1000

ReturnStr = ReturnStr & vbNewLine & MSComm1.Input

MSComm1.Output = strMessage & Chr(26)

Sleep 2000

ReturnStr = ReturnStr & vbNewLine & MSComm1.Input

Debug.Print ReturnStr

SBUFF = ReturnStr

===============================================

Kindly help me out ....

Regards

Saqlain Raza Hemani

Xperia and Postfix (IMAP) - how to download mail from private Folder

developerworldwatch@kpi-consulting.net — Sat, 11 Apr 2009 10:47:08 GMT

Hi to all,

I'm in trouble. I'm trying to configure my XPERIA in order to check my mail address (IMAP). I can check correctly the Sent Mail and Incoming mail but I can't see any mail into my Personal Folder that I have create like for example Experia, Job and some other.

My personal Mail server is configured with Postfix and I have an IMAP account.

With some other mobile phone everything works fine and also with Outlook and Thunderbird mail client.

Can anyone help me please ?

Thanks in advance,

Leonardo